DMF Series Accurate and Reliable Mass Flow Measurement
Coriolis Mass Flowmeter is designed according to the principle of Coriolis force. It has two parallel vibrating tubes. During the operation, a driver stimulates the tubes to vibrate at a resonant frequency of the system. As the flow passes through the tubes, the fluid momentum coupled with the oscillatory motion created by the vibration induces a Coriolis force along the length of the tubes. This force causes the tubes to twist in opposition to each other and translates into a phase shift (or time delay) along the length of the tube. Phase Shift is directly proportional to the Mass Flow Rate, while Density can be measured based on the frequency.
Dual Symmetric Differential Structure
High Sensitive High Range Ration
Non Linear Vibration Suppression Technology
Smooth Flow Designed for Anti0interference
Classic U-Shape Tube designed for High Sensitivity
All touch screen operation. The inner technical parameter can be modified by the touch screen.
The Large V shape Design, with high stability, and the pressure loss is low.
Balance Matching Technology of the dynamic vibration improve the system stability
Accurate Controlling, Specialized for the loading and unloading batch controlling occasions.
Nominal Diameter (mm) 15 – 300
Temperature Measurement Integral: -50°C to +125°C
Remote: -50°C to +200°C
High Temp. Remote: -50°C to +300°C
Accuracy Standard: 0.5% Optional: 0.2% / 0.1%
Process Connection Flanges according to DIN / ANSI / JIS
Nominal Pressure (bar) 16 25 40 63 (250 bar is available upon request)
Protection Class (Enclosure) IP67
Power Supply 18 - 36 VDC / 85 - 265 VAC
Signal Output Standard: 4-20mA, Pulse Output, RS485 (Modbus)